Name: Fenix E20 V2.0 EDC Flashlight - 350 Lumens
Brand: Fenix
SKU: FX-E20V2
Price: 44.95 USD
Availability: InStock

Fenix E20 V2.0 EDC Flashlight - 350 Lumens

$44.95

Shipping calculated at checkout.

Quantity

Satisfaction guaranteed

Free shipping for orders over $25

In stock, ready to ship
Inventory on the way

Earn reward points - get discounts!

Backed by the Fenix Limited Lifetime Warranty

Fenix E20 V2.0 is a lightweight EDC flashlight you'll want to take everywhere. This compact model runs on two AA batteries and boasts a maximum lumen output of 350. It has a single rear switch to power the flashlight and switch between output levels. Plus, it features a 3mm thick patented ultra-thin optical lens, an 85° beam angle, and an A6061-T6 aluminum body. Weighing only 1.4 ounces without the batteries, the E20 V2.0 is as big as a pen and easily attaches to a briefcase or purse making it an ideal everyday carry flashlight.

Outputs

High: 350 Lumens, 3.4 hours, 413 ft
Med: 150 Lumens, 11.1 hours, 249 ft
Low: 30 Lumens, 93.3 hours, 114 ft
Eco: 5 Lumens, 200 hours, 49 ft

Details

Luminus SST20 LED
Powered by 2 AA batteries
Patented Ultra-thin optical lens
Soft, balanced beam 85° Degree Beam Angle
IP68 Rated Waterproof Protection: Fully submersible to 6.5 feet deep for up to 30 Minutes
Single switch operation
100,000 Tail-switch Press test
No standby current while not in use

Batteries

Included: Two non-rechargeable AA Alkaline Batteries
Recommended: Two rechargeable AA batteries. We recommend Energizer brand AA batteries.

Size

Length: 5 inches

Head Diameter: 0.83 inches

Body Diameter: 0.66 inches

Weight: 1.48 oz

Fenix E20 V2 Flashlight
AA Batteries (Qty 2)
Lanyard
Spare O-ring
Fenix E20 V2 User Manual
Warranty Card

What kind of LED is used in E20 V2.0?

The Fenix E20 V2 uses a Luminus SST20 LED.

What batteries work with the Fenix E20 V2 flashlight?

The Fenix E20 V2 is compatible with and includes two Alkaline AA batteries. You may also use two Ni-MH AA batteries, or two non-rechargeable lithium AA batteries.

Does the E20 V2 feature overheat protection?

Yes, the light will accumulate heat, especially when used on higher output levels. If the light reaches a temperature of 140° F (60° C) the output will automatically step down by 1% every second until the Med output is reached. Once the temperature has been reduced below this threshold the output will step up by 1% every second until the previous output has been restored.